For Better Performance Please Use Chrome or Firefox Web Browser

Dr. Mahmoud Kadkhodaei

Professor of Mechanical Engineering in Smart Materials

Welcome to Dr. Mahmoud Kadkhodaei

No front page content has been created yet.

Office : Department of Mechanical Engineering , Room 16 Email : kadkhodaei [at] cc.iut.ac.ir Phone : +98 31 33912625 Fax : +98 31 33912628 Web Site : http://kadkhodaei.iut.ac.ir

Professor of Mechanical Engineering in Smart Materials

Research Fields : Smart Materials

Additive Manufacturing

Biomechanics

Metal Forming

Teaching

Recent Publications

Kamarni, M., and Kadkhodaei, M., “An Investigation into the Simple Tensile Test of SMA Wires Considering Stress Concentration of Grippers”, Journal of Materials Engineering and Performance, Vol. 23, No. 3, pp. 1114-1123, 2014

Heidari, B., Kadkhodaei, M., and Karimzadeh, F., “Shape Setting and Thermomechanical Characterization of Shape Memory Alloy Springs”, The Bi-Annual International Conference on Experimental Solid Mechanics (X-Mech), Tehran, Iran, 2014

Qwamizadeh, M., Kadkhodaei, M., and Salimi, M., “Asymmetrical rolling analysis of bonded two-layer sheets and evaluation of outgoing curvature”, International Journal of Advanced Manufacturing Technology, Vol. 73, No. 1-4, pp. 521-533, 2014

Rezaei, L., and Kadkhodaei. M., “Finite Element Analysis of Shape Memory Alloy Beam”, The 22nd Annual (International) Conference on Mechanical Engineering, Ahwaz, Iran, 2014 (In Persian)

Mehrabi, R., Kadkhodaei, M., and Elahinia, M., “Constitutive modeling of tension-torsion coupling and tension-compression asymmetry in NiTi shape memory alloys”, Smart Material and Structures, Vol. 23, No. 7, 075021, 2014

Mosavar, A., Ziaei, A., and Kadkhodaei, M., “Evaluation of Implant Stability in Transition to the Secondary Stability”, The 22nd Annual (International) Conference on Mechanical Engineering, Ahwaz, Iran, 2014

Mehrabi, R., Kadkhodaei, M., and Elahinia, M., “A Thermodynamically-Consistent Microplane Model for Shape Memory Alloys”, International Journal of Solids and Structures, Vol. 51, No. 14, pp. 2666–2675, 2014

Heidari, B., and Kadkhodaei, M., “Numerical study of pseudoelastic shape memory alloy helical springs”, The 22nd Annual (International) Conference on Mechanical Engineering, Ahwaz, Iran, 2014

Mehrabi, R., Kadkhodaei, M., and Elahinia, M., "Microplane modeling of shape memory alloys in alternative formulation ", ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS), Utah, USA, 2013

Amrollahipour, R., Kadkhodaei, M., and Kameli, P., "Experimental investigation on behaviors of Ni-Mn-Ga ferromagnetic shape memory alloy single crystals", The 21st Annual (International) Conference on Mechanical Engineering, Tehran, Iran, 2013

Qwamizadeh, M., Kadkhodaei, M., and Salimi, M., “Slab analysis of asymmetrical rolling of bonded two-layer sheets”, ISIJ International, Vol. 53, No. 2, pp. 265-273, 2013

Karamooz, M.R., and Kadkhodaei, M., "Finite Element Modeling of the Elastic Modulus of Ti6Al4V Scaffold Fabricated by SLM", 5th BIOT Conference on Poromechanics, Vienna, Austria, 2013

Mehrabi, R., and Kadkhodaei, M., “3D phenomenological constitutive modeling of shape memory alloys based on microplane theory ”, Smart Materials and Structures, Vol. 22, 025017, 2013

Mostashfi, A., Kadkhodaei, M., Poursina, M., and Bakhshi, S. R., “An investigative study on the performance of twist roll machine in a continuous cold strip rolling mill”, Proc I MechE, Part C, J of Mech Eng Sci, Vol. 227, No. 8, pp. 1623-1649, 2013

Latifi, M., Farhatnia, F., and Kadkhodaei, M., “Buckling Analysis of Rectangular FGM Plates under Arbitrary Boundary Conditions”, European Journal of Mechanics - A/Solids, Vol. 41, pp. 16-27, 2013

Sakhaei, A. H., Salimi, M., and Kadkhodaei, M., “New multi-pass hot channel section rolling design by the finite element method”, Proc I MechE, Part C, J of Mech Eng Sci, Vol. 227, No. 12, pp. 2742-2750, 2013

Saberi, A., Safavi, S. M., Kadkhodaei, M., and Rabiei, F., "Two-point incremental forming analysis using slab method and experimental data", Modarres Mechanical Engineering, Vol. 13, No. 1, pp. 61-69, 2013 (In Persian)

Karamooz, M.R., Rezaei, R., Kadkhodaei, M., and Badrossamay, M.," Investigation on Manufacturability, Repeatability, and Mechanical Properties of Lightweight Polylactic Acid BCC-Z Cellular Lattice Structures Fabricated by Fused Deposition Modeling"

Ravanbakhsh, H., Jamalimehr, A., Kadkhodaei, M., and Kamrani, M., "Proposition of dog-bone geometry for shape memory alloys under simple tensile test", The 21st Annual (International) Conference on Mechanical Engineering, Tehran, Iran, 2013

Amrollahipour, R., Kadkhodaei, M., and Kameli, P., “Experimental Study on the magnetomechanical characteristics of Ni-Mn-Ga Ferromagnetic Shape Memory Alloy Single Crystals”, Iranian J. of Mech Eng, Transactions of ISME, Vol. 14, No. 1, pp. 72-84, 2013

Safaee, SH., Kadkhodaei, M., and Saidi , A., "MASHS: A Novel Method to Fabricate Porous Nickel-Titanium Shape Memory Alloy", The 20th Annual (International) Conference on Mechanical Engineering, Shiraz, Iran, 2012

Rezaei DA, H., Kadkhodaei, M., and Nahvi, H., “Analysis of Nonlinear Free Vibration and Damping of a Clamped-Clamped Beam with Embedded Pre-Strained SMA Wires”, Journal of Intelligent Material Systems and Structures, Vol. 23, No. 10, pp. 1107-1117, 2012

Rabiei, F., Saberi, A., Safavi, M., and Kadkhodaei, M., "Experimental Study and Finite Element Simulation of Two-Point Incremental Sheet Metal Forming", The 3rd Annual Conference on Manufacturing Engineering, Tehran, Iran, 2012 (In Persian)

Qwamizadeh, M., Kadkhodaei, M., and Salimi, M., “Asymmetrical sheet rolling analysis and evaluation of developed curvature”, International Journal of Advanced Manufacturing Technology, Vol. 61, No. 1-4, pp. 227-235, 2012

Safavi, M., Saberi, A., Rabiei, F., and Kadkhodaei, M., "CNC Forming of Sheet Metals", The 12th Annual (International) Conference on Manufacturing Engineering, Tehran, Iran, 2012 (In Persian)

Mehrabi, R., Kadkhodaei, M., Taheri M., and Elahinia, M., "Shape memory effect behavior of NiTi torque tubes in torsion", ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS), Georgia, USA, 2012

Mehrabi, R., Kadkhodaei, M., and Ghaei, A., “Numerical Implementation of a Thermomechanical Constitutive Model for Shape Memory Alloys using Return Mapping Algorithm and Microplane Theory”, Advanced Materials Research, Vol. 516-517, pp. 351-354, 2012

Mehrabi, R., Kadkhodaei, M., and Arbab Chirani, S., "Microplane Modeling of Martensite Reorientation in Shape Memory Alloys", European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS), Vienna, Austria, 2012

Saberi, A., Kadkhodaei, M., Safavi, M., and Rabiei, F., "Slab Method Analysis of Incremental Sheet Metal Forming", The 20th Annual (International) Conference on Mechanical Engineering, Shiraz, Iran, 2012 (In Persian)

Nahvi, H., Rezaei, H., and Kadkhodaei, M.," Non-linear vibration analysis of a beam with embedded shape memory alloy wires", The 10th International Conference on Motion and Vibration Control, Japan, 2010

Sakhaei, A. H., Salimi, M., and Kadkhodaei, M., “Caliber Design in Shape Rolling by Finite Element Method”, Steel Research International, Vol. 81, No. 9, pp. 174-177, 2010

Sakhaei, A. H., Salimi, M., and Kadkhodaei, M. “Investigation into the Roll Pass Design for Channel Beams in Conventional Rolling”, The 18th Annual (International) Conference on Mechanical Engineering, Tehran, Iran, 2010

Salem, M., Farzin, M., and Kadkhodaei, M., "Thin-Walled Tube Bending Process Simulation using ABAQUS Software and Investigate Comparison between Simulation, Experimental and Stress Analysis Results, The 11th Annual Conference on Manufacturing Engineering,

Latifi, M., Farhatnia, F., and Kadkhodaei, M., “Buckling analysis of FGM plates based on the theory of physical neutral plane”, The 3rd Annual Conference of Mechanical Engineering, Khomeinishahr, Iran, 2010 (In Persian)

Khataei, M., Poursian, M., and Kadkhodaei, M., "A Study on Fracture Locus of St12 Steel And Implementation Ductile Damage Criteria", The 10th International Conference on Numerical Methods in Industrial Forming Processes, Korea, 2010

Qwamizadeh, M., Kadkhodaei, M., and Salimi, M., “Analysis of Curvature Development in Asymmetrical Plate Rolling in Free and Forced Horizontal Entry Conditions”, Steel Research International, Vol. 81, No. 9, pp. 90-93, 2010

Mohagheghian, I., Kadkhodaei, M., and Salimi, M., "A Fully Coupled Electro-Thermo-Mechanical Model for SMA Wires", Third International Conference on Advances and Trends in Engineering Materials and Their Application, Canada, 2009

Rezaei, H., Nahvi, H., and Kadkhodaei, M., “Vibration Characteristics of a Beam with Shape Memory Alloy Wires: Frequency Analysis”, The 17th Annual (International) Conference on Mechanical Engineering, Tehran, Iran, 2009

Latifi, M., Farhatnia, F., and Kadkhodaei, M., “Buckling Analysis of Rectangular FGM Plates under Arbitrary Boundary Conditions”, Journal of Solid Mechanics, Vol. 2, No. 1, pp. 57-68, 2009 (In Persian)

Latifi, M., Farhatnia, F., and Kadkhodaei, M., “Application of Stocks Transformation on the Buckling Analysis of Plates with Arbitrary Boundary Conditions”, The 2nd Annual Conference of Mechanical Engineering, Khomeinishahr, Iran, 2009 (In Persian)

Jafari, S., Kadkhodaei, M., and Salimi, M., "Microplane Modeling of Shape Memory Alloy Torque Tubes", Third International Conference on Advances and Trends in Engineering Materials and Their Application, Canada, 2009

Mehranfar, Y., Mousabeigi, V., Vakili, F., Zarshenas, M., Arazm, M., and Kadkhodaei, M., "Design and Manufacture of A Novel Cycliodal Propeller", The 1st Annual Conference on Rotary Equipment, Tehran, Iran, 2008

Kadkhodaei, M., Salimi, M., Rajapakse, R. K. N. D., and Mahzoon, M., “Modeling of shape memory alloys based on microplane theory”, Journal of Intelligent Material Systems and Structures, Vol. 19, No. 5, pp. 541-550, 2008

Mohagheghian, I., Salimi, M., and Kadkhodaei, M., “Thermal response of SMA wires under electrical actuation”, The 16th Annual (International) Conference of Mechanical Engineering, Kerman, Iran, 2008

Kadkhodaei, M., and Javadinejad, M., “Statics for associate degree students”, Daneshpajouhan Publications, Isfahan, 2008 (In Persian)

Kadkhodaei, M., Salimi, M., and Poursina, M., “Analysis of asymmetrical sheet rolling by a genetic algorithm”, International Journal of Mechanical Sciences, Vol. 49, pp. 622-634, 2007

Kadkhodaei, M., Rajapakse, R. K. N. D., Mahzoon, M., and Salimi, M., “Modeling of the cyclic thermomechanical response of SMA wires at different strain rates”, Smart Materials and Structures, Vol. 16, No. 6, pp. 2091-2101, 2007

Kadkhodaei, M., Salimi, M., Rajapakse, R. K. N. D., and Mahzoon, M., “Microplane modeling of shape memory alloys”, Physica Scripta, T129, pp. 329-334, 2007

Forouzan, M., and Kadkhodaei, M., “A key to some selected softwares in analytical mechanics”, Toseye Amouzesh Publications, Tehran, 2005 (In Persian)

Forouzan, M., and Kadkhodaei, M., “A Key to some selected softwares in computer aided engineering”, Toseye Amouzesh Publications, Tehran, 2005 (In Persian)

Salimi, M., and Kadkhodaei, M., “Asymmetrical cold sheet rolling in free horizontal entry conditions”, Steel Grips, No. 150, pp. 75-81, 2004

Salimi, M., and Kadkhodaei, M., “Slab analysis of asymmetrical sheet rolling”, Journal of Materials Processing Technology, Vol. 150, No. 3, pp. 215-222, 2004

Forouzan, M., Salimi, M., Kadkhodaei, M., and Izady, J., “Trend of steel production in Iran, Part 1: Technology”, The 12th Annual (International) Conference of Mechanical Engineering, Tehran, Iran, 2004 (In Persian)

Salimi, M., Kadkhodaie, M., Forouzan, M., Rabizadeh, E., and Izady, J., “Trend of steel production in Iran, Part 2: Production Indices”, The 12th Annual (International) Conference of Mechanical Engineering, Tehran, Iran, 2004 (In Persian)

Salimi, M., and Kadkhodaei, M., “Slab analysis of cold asymmetrical sheet rolling”, The 11th Annual (International) Conference of Mechanical Engineering, Mashhad, Iran, 2003 (In Persian)